ECLAIR ACL Especificaciones descargar pdf (Pagina 11)

Arri 16 SR J-bar conversion

The conversion enables you to connect the video assist to the Arri 16SR J-bar type (rotating) viewfinder. This

will allow the camera operator to look through the viewfinder and enables the director and others working on

the production to view the finder image before and during shooting on a monitor screen.

Flicker-less B&W Video Tap

The Flicker-less CCD B&W Video Tap is an extremely

compact device (modified Sony XC-ST50) which provides a

high-resolution image with 768x494 pixels and flicker-less

speed of a 24fps motion picture camera. This unit has a rear

power ON/OFF switch with a LED indicator and panel gain

control switch. It is small ( only 1.75 x 1.15 x 3.6 inches), light

(only 140g) and has a low power consumption just 1.5 W

(125mA).

Specifications:

• Picture element: 768(H) x 494(V)

• Scanning system: 525 lines, 2:1 interlace

• Horizontal resolution: 470 TV lines

• Two modes: Flicker-less and High Light

• BNC video signal output connector

• Flicker reduction: 60% for 24fps, 100% for 30fps

• Sync system: Internal/external (switched automatically)

• Min. illumination: 0.3 Lux, F1.4 AGC mode

• Gain control: AGC/ Fixed gain 0dB/ Manual gain 0-20dB

• Power requirement: 11-15V DC

• Power consumption: 1.5W (125mA)

• Mount: C-mount or other

• Weight: 140g

• Size: 1.75” x 1.15” x 3.6” (44mm x 29mm x 92mm)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Sin comentarios

ECLAIR ACL Especificaciones Pagina 11